机械合金化Fe-Ni粉末的相结构

使用XRD和Moessbauer等方法，研究了在Ar气氛下机械合金化Fe—Ni粉末相结构的变化．结果表明，在机械合金化Fe64-Ni36粉末过程中，fcc相的数量随着球磨时间的增加先增加然后减少，与加乙醇球磨Fe64-Ni36的情形相同．当Ni的含量(原子分数)大于50％时，有fcc相、顺磁相和FeNi3形成，当Ni的含量低于50％时，bcc相的数量随着Ni含量减少而增加．Moessbauer谱的结果表明，因球磨时间或Fe、Ni比例的不同，Fe—Ni球磨粉末固溶体具有不同结构的原子配比。     

金属掺杂中孔分子筛的合成及其研究

以十二烷二胺(DADD)为模板剂,TEOS为硅源,通过水热合成法制备出了具有高金属含量的中孔分子筛Zr-MSU-V和Nd-MSU-V,采用XRD、TG-DTA和TEM等对合成的分子筛进行了表征.XRD结果表明,即使当Si/Zr或Si/Nd的摩尔比达到5或20时,获得的两种分子筛Zr-MSU-V和Nd-MSU-V均能保持良好的结晶度,TEM图清楚地展示了Zr-MSU-V具有有序的层状结构;TG-DTA的结果显示,903 K焙烧脱除模板剂不会破坏金属嵌入分子筛的结构,说明其具有良好的热稳定性;通过48 h水热处理后的分子筛仍保持其结构有序性,说明其具有优良的水热稳定性.     

多孔无机材料的性质及用途

对各种多孔无机材料的制备工艺原理和性质进行了论述，并分析了影响多孔无机材料孔径的因素，介绍了多孔无机材料在国民经济生产中的各种用途，指出了以往研究发展中存在的问题。     

纳米Al2O3粉体材料激光烧结成型基础试验研究

基于激光烧结快速成型技术 ,利用CO2 激光对纳米Al2 O3 粉体材料进行激光烧结成型的试验并用扫描电镜(SEM)和X射线衍射仪等对烧结样品进行分析。结果表明 ,在适当的工艺参数下 ,对Al2 O3 粉体的激光烧结可获得一定形状的、致密的陶瓷块体 ,块体内部晶粒保持在纳米尺度     

CNTs/Polyester复合材料的微波吸收特性研究

研究了添加不同质量分数CNTs的聚酯基复合材料的电磁波吸收性能,初步分析了CNTs的螺旋结构和手征性质导致8～40GHz波段良好的吸收。其中厚度为1.40mm±0.05mm的CNTs/Polyester复合材料在25GHz有较强的吸收峰。     

ICD in perspective: Putting social responsibility into practice

The Industry Council for Development (ICD) is an Industry Non Governmental Organisation established in 1990; it aims to contribute to improving public health through partnership projects on food safety and nutrition. This paper presents ICD’s activities in the past years and explains the reasons why the food industry should have a vested interest in supporting training and education of health professionals in food safety.     

Modeling of Material Deformation Kinetics in the Prefracture Zone

Based on the concept of complete stress–strain diagrams, we propose a new model describing the law of stress distribution in the prefracture zone in plastic materials in view of the type of the stressed state.     

Synthesis and luminescence of Sr2CeO4 fine particles

Fine particles of a blue emission phosphor Sr₂CeO₄ have been synthesized using a chemical co-precipitation technique, and the textual and luminescent properties were compared with the one synthesized by the conventional solid-state reaction method. Particle size and distribution of the Sr₂CeO₄ fine powder prepared by the co-precipitation process were smaller and narrower than those obtained by the samples prepared from the conventional one. The emission intensity of the fine particles was equal to that of the larger particles prepared from the solid-state reaction, on the contrary to the general tendency that emission intensity decrease with particle size reduction. Although no Ce³⁺ peaks were observed in EPR measurements, X-ray photoelectron spectra of the samples clearly elucidated the existence of Ce³⁺ only on the surface of Sr₂CeO₄.     

Failure analysis of a broken tooth

Several days after heart surgery, a patient discovered his upper right canine tooth had broken at the root. Such tooth damage, recognized post-operatively, is usually assumed to be caused by blunt mechanical force from an instrument used by the anesthesiologist during placement of a breathing tube at the start of surgery. In this case, the patient had saved the crown portion of the broken tooth, and it was possible to examine the root fracture characteristics. The curvature and direction of the crack path and natural tooth situation suggested that failure could be described through a cantilever beam model. This was confirmed when a whole extracted sample tooth was embedded and broken by a measured force in a manner consistent with the model. The resulting fracture surface matched that of the patient’s broken canine tooth. However, the high load and force direction necessary to fracture the root was inconsistent with forces applied during the anesthesia procedure. The failure analysis and further investigation indicated tooth clenching on the breathing tube during recovery was the likely cause of fracture. This paper presents an alternate explanation for intubation-related dental injury, demonstrates the practicality of fractographic analysis of biological materials, and introduces a methodology for simulating in vitro tooth settings for mechanical testing.     

锂离子电池正极材料LiMn2O4的研究进展

具有尖晶石相的LiMn2O4因价格低、无毒、无环境污染、制备简单、研究较成熟,因此有着很好的应用前景,被看作最有可能成为新一代商用锂离子二次电池正极材料.由于LiMn2O4电化学循环稳定性能不好,表现在可逆容量衰减较大,尤其在高温下(>55℃)使用衰减更严重,从而限制了它的商业化应用.经过近十几年的研究,人们对其衰减机理有了比较清晰的了解,提出了造成容量衰减的几种可能原因如Jahn-Teller畸变效应、Mn2+在电解质中的溶解、出现稳定性较差的四方相以及电解质的分解等.通过掺杂、表面包覆、制备工艺的改进,人们已能制得循环稳定性能较好的尖晶相材料.本文结合我们研究小组的最新研究成果对锂离子二次电池正极材料LiMn2O4的最新研究进展进行综述和评论.